028 3517 0401
Precision Digital Corporation |
|
|
Established in 1974, Precision Digital Corporation designs, develops, manufactures, sells and distributes digital devices driven by embedded systems that transform, display and control critical process information. Our products can be located virtually anywhere in the plant; from the control room to Class I Div 1 areas (both explosion-proof and intrinsically safe). They will accept virtually any analog signal such as 4-20 mA, thermocouple, RTD, DC voltage and pulse as well as digital serial data, such as Modbus. Products include Digital Panel Meters, PID Process and Temperature Controllers, Annunciators, Multi-Channel Controllers, Loop-powered Indicators, Flow Rate Meters and Totalizers, Batch Controllers and Pump Controllers. |
|
Application: Acid Tank Level Monitoring in Feet & Inches |
|
|
These two PD6801 ProtEX-F&I Feet and Inches level meters are being used to display tank level safely at ground level. Previously, an operator needed to climb to the top of the acid solution storage tanks; just to read the level. This was a dangerous and time consuming solution. Each PD6801 Feet and Inches level meter reads the 4-20 mA signal from a radar level transmitter at the top of a tank. The LCD display is ideal for reading in sunlight, and the rugged explosion-proof enclosure is great for this tough environment. Now they have a easy to read feet and inches display solution that includes a bar graph tank level indicator, and no dangerous tank climbing is required. |
|
Precision Digital manufactures a comprehensive line of digital panel meters, including temperature controllers, loop-powered indicators, and process meters. We strive to make it as easy as possible for you to find the parts that you need. Use the links below to select the right product(s).
Precision Digital Products by Type
 |
Digital Panel MetersDigital panel meters are display instrumentation devices that read a variety of process & temperature input signals, process, and display that information for a user at an instrument panel or cabinet sub-panel. The most common are 1/8 DIN size digital panel meters, however Precision Digital offers a range of other sizes as well. Many have a NEMA 4X or IP65 rating; however this is only the rating for the seal at the panel, leaving the rear area behind the mounting panel exposed. |
 |
Large Display MetersLarge display meters offer the same functionality of other meters but all have displays of 1" or larger. They are available in a wide variety of case styles, input types, and functions, but all have large, clear, easy to read digital displays. |
 |
Loop-Powered MetersLoop-powered meters process and display 4-20 mA inputs. This 4-20 mA signal also provides all the power necessary to operate the device, so no separate power wiring is required. They are available in a wide variety of case styles, and many have hazardous area approvals. |
 |
Temperature ControllersPrecision Digital offers a complete line of auto-tuning PID temperature controllers. These controllers accept process and temperature inputs and a variety of control, alarm, and retransmission outputs. Standard set point controllers are available as well as controllers utilizing ramp & soak set point programs. |
 |
AnnunciatorsAnnunciators are panel mounted devices that monitor discrete inputs and offer visual indication and an audible alarm if an input alarm state is detected. |
 |
ScannersA scanner allows one other meter to display multiple process or temperature inputs. The scanner cycles through each input, with a visual display of what input is currently selected, and displays it on the meter attached to the scanner. This is a simple low-cost alternative for multiple meter solutions. |
 |
EnclosuresA wide range of enclosures are available to mount and protect your meters and controllers. |
 |
Field Mounted ProductsField mounted devices read a variety of process & temperature input signals, process, and display that information. Field mounted products include a full enclosure around the device, and do not require a panel, electrical cabinet or additional enclosure to encase the device. They are commonly wall or pipe mounted. Many have NEMA 4X or IP65 ratings, which applies to the entire device housing. |
Precision Digital Products by Application
 |
LevelLevel is one of the most common applications for Precision Digital products and we offer a wide variety of products to satisfy just about any level display and control application you might have. Our products can power the level transmitter, be scaled in any engineering unit and linearized for non-linear shaped tanks, control pumps and valves with up to four relays, connect to a computer, and output a 4-20 mA signal. In addition these meters are available in a wide variety of enclosures ranging from panel mount to NEMA 4X to explosion-proof and carry approvals such as FM, CSA, and UL. |
|
|
Pump ControlWith Precision Digital's meters, you can configure simple on/off pump control, multiple speed pumping, cascade pumping, and/or pump alternation. Backup pumps on lift stations can be controlled by level limits or inlet flow rates. Variable speed pump output (4-20 mA, reverse or direct acting) can be custom scaled for level or flow rate. On the ProVu, up to 8 relays can be used. Irregular shaped sumps can be linearized using the ProVu's 32-point linearization. |
|
|
TemperaturePrecision Digital offers a wide variety of meters, indicators, controllers, and transmitters to satisfy just about any temperature application. Our Trident line of digital panel meters can be set up in the field for thermocouple or RTD inputs. Our Nova line of PID temperature controllers are high accuracy, full-featured controllers available in ramp & soak, programmable, and limit controller configurations. One particularly useful feature of the Fluidwell F-Series temperature indicators is that they can be battery powered. All of these products can be equipped with a 4-20 mA output; resulting in a temperature transmitter. |
 |
PressurePrecision Digital offers digital pressure gauges that will take a direct pressure input as well as digital meters that will accept the voltage or current output from a pressure transducer or transmitter. The digital pressure gauges are available in Precision Test, Industrial and General Purpose versions. They can be battery, loop or DC powered and have relays and analog outputs. The digital meters will provide the power to drive the transmitter or transducer and can be field calibrated for display in engineering units. They are available in panel, NEMA 4X and explosion-proof configurations. |
 |
FlowPrecision Digital offers a wide variety of flow rate indicators, totalizers, and flow computers to help you satisfy just about any flow application. These instruments will accept analog or pulse inputs and provide power to drive the flow meter. They can be powered from AC, DC, loop or battery and are available in panel, NEMA 4X, and explosion-proof enclosures. With all of these features and the various agency approvals available, you're sure to find just what you are looking for. |
|
|
Open Channel FlowPrecision Digital's analog input Rate/Totalizers, in combination with an ultrasonic level transmitter, provides an economical way to measure and display open channel flow rate and total in most weirs and flumes. All the user needs to do is enter the exponent for the weir or flume into Precision Digital's analog input rate/totalizers, which would then automatically raise the input signal to that exponent power. One product, the PD6200, also has a "sampling" function. This can be configured to trigger the taking of periodic samples. Sampling can be based on the total flow or the flow rate. |
 |
Hazardous AreaHazardous areas requiring specialized explosion-proof or intrinsically safe equipment require product approvals from various agencies depending on your location. Whatever your agency preference, Precision Digital offers products with FM, CSA, ATEX, and IECEX approvals for hazardous areas for applications covering the full range of process and temperature possibilities. |
 |
SpeedRPM meters and counters provide pulse outputs that can be read and scaled by these devices to read engineering units on the display. Pulse or Square wave inputs are available as open collector, switch, 0-5 V, 0-12 V, or 0-24 V @ 30 kHz. High voltage DC inputs of 0-300 VDC are also available for reading VFD or other motor control signals. Analog and relay outputs are available for process monitoring and control as well as dual-line displays and multiple input devices. |
 |
WeightStrain gauge meters are used to measure weight, mass, force, or deflection when directly connected to a strain gauge. All common strain gauge inputs can be used including 0-30 mV, 0-200 mV, ± 15 mV and ± 100 mV These units provide the 5, 10, or 24 volt excitation for the strain gauge and scale the reading to display engineering units. Analog and relay outputs are also available for process monitoring and control. |
|
|
Discrete Alarm MonitoringPrecision Digital's annunciators can be used anywhere discrete point monitoring is needed, from temperature alarms to ultrasonic level switches. They can be programmed for all the common ISA alarm sequences, accept switch, transistor, and logic level inputs, and can be supplied with free custom printed message labels. A built-in horn provides audible indication of alarm condition and up to two relays can be used to control external devices such as beacons, horns, or buzzers. |
 |
Remote Modbus DisplayModbus displays provide local indication for Modbus serial output sensors as well as panel indication for Modbus networks. The PD865 Snooper is a digital panel meter that can be programmed as a Modbus RTU Master, Slave, or Snooper. In Snooper mode, the Snooper can sit anywhere on the Modbus network and display any process variable on the bus. The Snooper can be equipped with a 4-20 mA output option which will convert the serial input to an isolated 4-20 mA output. |
 |
CalibrationPrecision calibrators are finally down to a price level that one can reconsider performing calibration services in-house. A precision calibrator sources voltage, current, TC, RTD, and ohms with a second completely isolated measurement channel. Precision Digital offers a universal calibrator for a single laboratory calibration instrument unmatched in versatility, performance, and value. Our calibrator's world-class performance and features are accessed through a very simple-to-use, intuitive user interface., and is truly a "process calibration laboratory in a box." |
Precision Digital Products by Function
|
|
Process MetersProcess meters cover a wide range of display, monitoring, and control devices all of which accept process inputs: direct current or voltage inputs from transmitters. This makes them very versatile for applications across the range of flow, level, pressure, and temperature; anywhere a measurement device outputs a process signal and a local display or monitor is necessary. |
 |
Temperature MetersPrecision Digital temperature meters accept a direct temperature input from a thermocouple or RTD. Many also accept process inputs from temperature transmitters. Our Trident line of digital panel meters can be set up in the field for thermocouple or RTD inputs. All of these products can be equipped with a 4-20 mA output; resulting in a temperature transmitter. Relay alarm outputs are also available. |
|
|
Level MetersLevel is one of the most common applications for Precision Digital products and we offer a wide variety of products to satisfy just about any level display and control application you might have. Our products can power the level transmitter, be scaled in any engineering unit and linearized for non-linear shaped tanks, control pumps and valves with up to four relays, connect to a computer, and output a 4-20 mA signal. |
 |
Pressure MetersPrecision Digital offers digital pressure gauges that will take a direct pressure input as well as digital meters that will accept the voltage or current output from a pressure transducer or transmitter. The digital pressure gauges are available in Precision Test, Industrial and General Purpose versions. The digital meters will provide the power to drive the transmitter or transducer and can be field calibrated for display in engineering units. |
|
|
Flow Rate MetersFlow rate meters are designed to display the rate of flow of any material. They accept a process input from a flow meter, and scale this value to an engineering value to be displayed. Often these meters have relays or analog outputs to monitor, alert, or control the rate of flow, as well as power supplies to power the flow meter being used. Because they scale the process signal, the absolute rate can be as small or large as the number of display digits will allow; from liters per day to gallons per second. |
|
|
Strain Gauge MetersStrain gauge meters are used to measure weight, mass, force, or deflection when directly connected to a strain gauge. All common strain gauge inputs can be used including 0-30 mV, 0-200 mV, ± 15 mV and ± 100 mV These units provide the 5, 10, or 24 volt excitation for the strain gauge and scale the reading to display engineering units. Analog and relay outputs are also available for process monitoring and control. |
 |
Auto-Tune PID ControllersAuto-tuning PID controllers offer the accuracy of PID control without any of the complicated setup and tuning required that is often a part of PID control systems. The PD540 Series provides auto-tuning PID set point control. The PD550 Series provides similar PID control but using ramp & soak set point programs. Additional outputs, Modbus serial communication, and digital inputs allow them to greatly expand on their basic functionality. |
|
|
Alarm AnnunciatorsAlarm annunciators are panel mounted devices that monitor discrete inputs and offer visual indication and an audible alarm if an input alarm state is detected. Precision Digital offers 4 and 8 channel annunciators that are NEMA 4X, sunlight readable, and come with custom printed adhesive message labels for your specific application. |
|
|
ScannersA scanner allows one other meter to display multiple process or temperature inputs. The scanner cycles through each input, with a visual display of what input is currently selected, and displays it on the meter attached to the scanner. This is a simple low-cost alternative for multiple meter solutions |
|
|
Modbus ProductsPrecision Digital offers Modbus serial input displays and Modbus serial communication data sniffers. These devices integrate into a Modbus network and can serve as masters, slaves, or passive data sniffers (aka: Snooper Mode) to introduce meters into the network. These displays can also retransmit the Modbus data as a 4-20 mA signal, or have relay alarm outputs based on the data. |
|
|
CalibratorsThe accuracy of instrumentation has improved greatly over the decade. A true calibration requires that the calibration standard be approximately four times as accurate as the unit being calibrated. Fortunately, precision calibrators have advanced with this change, and surprisingly prices for the calibrators have come down in many cases. So much so that a new look at the cost of owning vs. using outside calibration services may be wise. Our multi-function calibrator calibrates a wide variety of instrumentation. It can also simulate temperature (RTD & TC) signals, or mA and voltage signals for calibration and/or system testing. It can also test/qualify temperature sensors directly. |
Precision Digital Products by Series
 |
ProVu Process & Temperature Meters, and Rate/TotalizersThe ProVu models with 2-line displays are full-featured, high end, digital panel meters that represent the continuum of 34 years of development by Precision Digital Corporation. The ProVu joins the Sabre and Trident as the most powerful member of our 1/8 DIN meter family. The ProVuincludes an advanced process meter, temperature meter, and analog or pulse input rate/totalizer.One of the most important things that the ProVu does for our "New Generation" of products is that the ProVu makes available 2 or 4 relays with 4-20 mA output. In fact, with the expansion module, the ProVu can control up to eight relays! |
  |
Trident Series Process and Temperature MetersThe Trident Process and Temperature Meters are some of the most versatile digital panel meters on the market and will satisfy a wide variety of applications. The Trident can be field programmed to accept process voltage (0-5 V, 1-5 V, etc), current (4-20 mA), 100 Ohm RTDs, and the four most common thermocouples. It is housed in a shallow-depth, 1/8 DIN enclosure that features a NEMA 4X front panel and convenient mounting hardware. There are two power options for the Trident: 85 to 265 VAC or 12-36 VDC and it can provide 24 VDC to power the transmitter if needed. Programming and setup can be performed with the four front panel pushbuttons, free MeterView software, or using the Copy function. The X2 model has a sunlight readable 1.2" display. |
  |
Sabre Process and Temperature MetersThe Sabre P PD603 process meter and PD743 temperature meter combine operational simplicity with high end features to deliver the perfect low-cost meter for display only applications. The Sabre menu structure is easy to navigate because the only selections are input, decimal point location and scaling values. There are no other menu choices to add confusion during the setup process and indirectly increase the cost of a "low-cost" meter. However, despite being a low-cost meter, the Sabre is still packed with many features typically found only on more expensive meters, like NEMA 4X front, universal power supply, front panel programming, input current overload protection, and UL Listing and CE marking. |
 |
Loop Leader Process Meters and Rate/TotalizersThere's nothing stripped down or bare bones about these loop-powered indicators; they're designed for demanding process control applications. Standard features include a full 5-digit backlit display with bargraph, on-screen custom engineering units, and max/min display capabilities. There are models available for general-purpose applications and for hazardous area applications (intrinsically safe).Even with all the features packed into these meters, they're still easy to setup and get running. Everything is programmed from the front panel buttons with no pots or jumpers to deal with. In fact, these indicators can be scaled without a signal source for even quicker set up times. |
 |
Snooper SeriesThe PD865 Snooper is a digital panel meter that displays digital data obtained from a network using a Modbus RTU protocol. It can be programmed as a Modbus RTU Master, Slave or Snooper. A unique feature of the Snooper is its Snooper mode. In Snooper mode, the PD865 “listens” for a certain Modbus address. When the address and data appear, the meter captures the data and places it on the display. One PD865 can be programmed to proxy poll up to 8 registers on up to 8 network addresses. This creates traffic for other Snoopers to display. The PD865 can handle many different data formats. |
 |
ProtEX SeriesThe ProtEX series is a line of explosion-proof process meters that had replaced some of our legacy products. All the newer models have many new features. The ProtEX has a brightly lit 0.6" display with a second alphanumeric display for units of measure or tag name. It has thru-glass infrared SafeTouch™ buttons, eliminating the need for magnets that get lost, or for opening the cover when making parameter modifications. The ProtEX One has 1" high digits, a superior backlight, easy calibration and installation, and operates from -40 to 75°. The ProtEX Lite has 4-button programming, noise filter, max/min display, password protection, and the same operating temperature range. |
 |
Survivior SeriesThe PD662 Survivor is a NEMA 4X, CE, and CSA Certified loop-powered meter that is perfect for applications where a simple, inexpensive display is required and AC power is not available. The PD66'2 is scaled using four push buttons and can be done without applying an actual calibration signal. The PD662's display will read up to 2999; we call this 3+ digits! The loop-powered backlighting option lets you see the display under any lighting condition and is powered completely from the 4-20 mA loop. The PD662 is housed in a rugged NEMA4X enclosure and is provided with one ½" NPT pipe conduit hole. The PD662 is also available with an optional DC-powered heater that allows the PD662 to operate in temperatures as low as -55°C. |
 |
Consolidator Multi-Channel Controller SeriesThe ConsoliDator is an easy to use multi-channel controller that accepts 4-20 mA inputs, flowmeter pulse inputs and digital inputs and displays them on a large backlit LCD screen. The ConsoliDator’s main screen displays all the inputs in both numeric and bargraph format and its individual screens display detailed information about each input. The ConsoliDator is suitable for all general purpose monitoring and controlling applications such as flow, level, pressure, temperature and vibration. The Modbus RTU feature makes the ConsoliDator ideal for SCADA applications. The ConsoliDator is available in wired and wireless configurations. |
 |
Nova Controller SeriesThe Nova series includes temperature and process meters and controllers in 1/16th, 3/16ths, 1/8th, and 1/4 DIN sizes. The Control functions include auto-tune PID, ramp & soak, and limit control. All Nova models have universal inputs and universal power supplies. The Nova Series is available with optional RS-485 communications and Modbus protocol; free Nova software that will allow up to 30 controllers to be monitored and controlled from a PC. Model combinations allow up to (3) relays outputs, 2 analog outputs, and (2) digital inputs. |
  |
Vigilante II Series Alarm AnnunciatorsThe Vigilante II annunciators are compact, panel-space saving, four and eight channel annunciators with sunlight readable alarm indicators, and Silence, Acknowledge, and Reset functions. Despite all the traditional annunciator features that are included in the Vigilantes, they are still very much low-cost, easy to use alarm annunciators perfect for replacing stand-alone lights!The Vigilantes are housed in shallow depth, 1/8 DIN, NEMA 4X front, enclosures for easy and convenient mounting. They can be programmed for all the common ISA alarm sequences, accept switch, transistor, and logic level inputs, and can be supplied with free custom printed message labels. |
  |
Minimux IIThe MINIMUX® II is a microprocessor-based eight channel analog input scanner/multiplexer and annunciator that provides low-cost automatic switching for multi-point display and alarm systems. Each MINIMUX II can automatically switch up to eight inputs to another device such as a digital panel meter, controller, or PLC. Signal switching is done via reed relays making the MINIMUX II ideal for switching thermocouples, RTDs, control loops, and AC & DC signals. There are two companion products for the Minimux II that are Scanner & Alarm systems called the Watchdog PDS178 & PDS178X2. |
  |
Digital Pressure GaugesThese multi-function digital pressure gauges are a great solution that will save you time, money, and space. They are loaded with features such as large numeric and bargraph backlit LCD, 4-20 mA output, and relay options. Battery power is standard; loop-power and 12-36 VDC power are optional. Available as general purpose, industrial, or test gauge models.The 200 Series pressure gauges can handle pressure ranging from vacuum to 20,000 psi. The pressure is displayed on a large 5-digit LCD. These gauges have a choice of full scale accuracies from 0.05% to 0.5%. A backlight comes optional with these gauges and can be set to either manual or auto off. |
Quick Shipment Program
|
The Precision Digital Quick Shipment Program (QSP) guarantees shipment within 2 days for Precision Digital's most popular products. QSP products (9 pieces or less) will ship within 2 days or we will ship the product at our expense. Qualifying orders received by 2:00 PM EST will ship the same day or the following day. Qualifying orders are those orders that are shipped within the United States of America and contain only QSP products. |
| Model | Description |
| PD154-6R2-1 |
Vigilante II 4-Point Alarm Annunciator Powered from 85-265 VAC |
| PD158-6R2-1 |
Vigilante II 8-Point Alarm Annunciator Powered from 85-265 VAC |
| PD540-6RA-00 |
Auto-Tune PID Process & Temperature Controller 1 Relay, 1 Analog output 1/16 DIN |
| PD6000-6R0 |
ProVu Dual-Line 6-Digit Process Meter No Options Installed Powered from 85-265 VAC |
| PD6000-6R2 |
ProVu Dual-Line 6-Digit Process Meter 2 Relays Powered from 85-265 VAC |
| PD6000-6R3 |
ProVu Dual-Line 6-Digit Process Meter 4-20 mA Output Powered from 85-265 VAC |
| PD6000-6R4 |
ProVu Dual-Line 6-Digit Process Meter 4 Relays Powered from 85-265 VAC |
| PD6000-6R5 |
ProVu Dual-Line 6-Digit Process Meter 2 Relays + 4-20 mA Output Powered from 85-265 VAC |
| PD6000-6R7 |
ProVu Dual-Line 6-Digit Process Meter 4 Relays + 4-20 mA Output Powered from 85-265 VAC |
| PD6000-6H0 |
ProVu Dual-Line 6-Digit Process Meter No Options Installed Powered from 85-265 VAC SunBright Display |
| PD6000-6H2 |
ProVu Dual-Line 6-Digit Process Meter 2 Relays Powered from 85-265 VAC SunBright Display |
| PD6000-6H3 |
ProVu Dual-Line 6-Digit Process Meter 4-20 mA Output Powered from 85-265 VAC SunBright Display |
| PD6000-6H4 |
ProVu Dual-Line 6-Digit Process Meter 4 Relays Powered from 85-265 VAC SunBright Display |
| PD6000-6H5 |
ProVu Dual-Line 6-Digit Process Meter 2 Relays + 4-20 mA Output Powered from 85-265 VAC SunBright Display |
| PD6000-6H7 |
ProVu Dual-Line 6-Digit Process Meter 4 Relays + 4-20 mA Output Powered from 85-265 VAC SunBright Display |
| PD603-6R0-0 |
Sabre P Low-Cost Process Meter Powered from 85-265 VAC |
| PD603-6R0-1 |
Sabre P Low-Cost Process Meter 24 V Transmitter Supply Powered from 85-265 VAC |
| PD6200-6R0 |
ProVu Analog Input Dual-line Flow Rate/Totalizer No Options Powered from 85-265 VAC |
| PD6200-6R2 |
ProVu Analog Input Dual-line Flow Rate/Totalizer 2 Relays Powered from 85-265 VAC |
| PD6200-6H0 |
ProVu Analog Input Dual-line Flow Rate/Totalizer No Options Powered from 85-265 VAC SunBright Display |
| PD6200-6H2 |
ProVu Analog Input Dual-line Flow Rate/Totalizer 2 Relays Powered from 85-265 VAC SunBright Display |
| PD6300-6R0 |
ProVu Pulse Input Dual-line Flow Rate/Totalizer No Options Powered from 85-265 VAC |
| PD6300-6R2 |
ProVu Pulse Input Dual-line Flow Rate/Totalizer 2 Relays Powered from 85-265 VAC |
| PD6300-6H0 |
ProVu Pulse Input Dual-line Flow Rate/Totalizer No Options Powered from 85-265 VAC SunBright Display |
| PD6300-6H2 |
ProVu Pulse Input Dual-line Flow Rate/Totalizer 2 Relays Powered from 85-265 VAC SunBright Display |
| PD6310-6R4 |
ProVu Pulse Input Batch Controller 4 Relays Powered from 85-265 VAC |
| PD6310-6R7 |
ProVu Pulse Input Batch Controller 4 Relays + 4-20 mA Output Powered from 85-265 VAC |
| PD662-0L0-00 |
Loop-powered NEMA 4X Meter No Options Installed |
| PD683-0K0 | Loop-Powered Panel Meter for Safe Area |
| PD686 |
FM Approved & CSA Certified Loop-Powered Meter NEMA 4X 1/2" Hole Bottom |
| PD688-0K0 | FM Approved & CSA Certified Loop-Powered Panel Meter |
| PD743-6R0-0 |
Sabre T Low-Cost Temperature Meter Powered from 85-265 VAC |
| PD765-6R0-00 |
Trident Process & Temperature Meter No Options Installed Powered from 85-265 VAC |
| PD765-6R0-10 |
Trident Process & Temperature Meter 24 VDC Transmitter Supply Powered from 85-265 VAC |
| PD765-6R2-00 |
Trident Process & Temperature Meter 2 Relays Powered from 85-265 VAC |
| PD765-6R2-10 |
Trident Process & Temperature Meter 2 Relays + 24 VDC Transmitter Supply Powered from 85-265 VAC |
| PD765-6R3-00 |
Trident Process & Temperature Meter 4-20 mA Output Powered from 85-265 VAC |
| PD765-6R3-10 |
Trident Process & Temperature Meter 4-20 mA Output + 24 VDC Transmitter Supply Powered from 85-265 VAC |
| PD765-6R3-20 |
Trident Process & Temperature Meter 4-20 mA Output + Dual 24 VDC Transmitter Supplies Powered from 85-265 VAC |
| PD765-7R0-00 |
Trident Process & Temperature Meter No Options Installed Powered from 12-36 VDC |
| PD765-7R2-00 |
Trident Process & Temperature Meter 2 Relays Powered from 12-36 VDC |
| PD765-7R3-00 |
Trident Process & Temperature Meter 4-20 mA Output Powered from 12-36 VDC |
| PD765-7R5-00 |
Trident Process & Temperature Meter 2 Relays 4-20 mA Output Powered from 12-36 VDC |
| PD765-6R5-10 |
Trident Process & Temperature Meter 2 Relays 4-20 mA Output + 24 VDC Transmitter Supply Powered from 85-265 VAC |
| PD765-6X0-00 |
Trident X2 Process & Temperature Meter No Options Installed Powered from 85-265 VAC |
| PDA2801 | Low-Cost Plastic NEMA 4X Enclosure for 1 Type C or D Meter |
Precision Digital Discontinued Products |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Updated January 24th, 2013 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Pressure gauge Precision Digital - Level meter Precision Digital - Flow Meter Precision Digital - Penal Meter Precision Digital - Process Meter Precision Digiatal - Precision Digital Vietnam
support@ansgroup.asia
0911472255
