Dwyer Vietnam Dwyer (Mercoid) Switch
DA-7041-153-9E
Saginomiya Vietnam Replaced by: SNS-C110W
(Pressure switch
P/N: SNS-C110XW, range: 1-10 kgf/cm2)
United Electric Controls Vietnam United Electric Temperature Switch
Series : 120
Model : J120-172
Adjustable Range : 2 to 50psi
Deadband : 0.1 to 1.5psi
Proof Pressure : 1000psi
Enclosure : Die cast aluminium, epoxy
powder coated; gasketed; coverlock; internal set
point lock standard on types J, C, F; gasketed
aluminium tamper- resistant dial cover on types B,
H, E, aluminium nameplate.
Sensing Element : Welded SS316L diaphragm
and ½” NPTF pressure connection, large 0.72”
orifice for clean-out Purposes (NACE MR-0175
compliant)
Factory Setting : Not included. If required,
extra cost incur
Switch Output : 1 SPDT
Electrical Rating : 15amp 125/250/480VAC
resistive
Electrical Connection : Two ¾” NPT; terminal
block standard
Classification : NEMA 4X, 7, 9, IP66
requirements
Approval : Class I, II, III, Division 1 &
2, Groups B, C, D, E, F, G. II 2 G EEx d IIC T6.
With ATEX Approval
United Electric Controls Vietnam United Electric Pressure Switch
Series : 120
Model : J120-192
Enclosure : Die cast aluminium, epoxy
powder coated; gasketed; coverlock; internal
set point lock standard on types J, C, F; gasketed
aluminium tamper-resistant dial cover on types B,
H, E, aluminium nameplate.
Adj. Set Point Range : 15 to 300 Psi {instead of 2
to 50 psi}
Dead Band : 3 to 18 Psi
Proof Pressure : 2500 Psi
Sensing Element : Welded SS316 diaphragm
and 1/2" NPTF pressure connection, large 0.72"
orifice for clean-out purposes.
Factory Setting : Not included. If required,
extra cost incur
Switch Output : 1 SPDT
Electrical Rating : 15 amp 125/250/480 VAC
resistive
Electrical Connection : Two 3/4" NPT E/C; terminal
block standard
Classification : NEMA 4X, 7, 9, IP66
requirements
Approval : Class I, II, III, Division 1 &
2, Groups B, C, D, E, F & G. With ATEX approval.
(P/N: J120-192, Range : 2-50 Psi; Process connection: 1/2"NPTF, Cable condult  connetction: 1/4" NPTF)