A3FD2CE876014DAE9018445E6FEF25A4.jpg

Force measurement

 

F381

SD card compatible Dynamic Force Processor with LCD Touch Panel Display

 
* Waveform comparison function (Sequential comparison of HI/LO limit set waveform and actual measurement waveform)
* Multi-hold function (HI/LO limit comparison is made by changing the type of hold function in each divided measurement segment)
* Standard equipped with displacement input (A 2-dimensional waveform comparison is possible by using both force and displacement inputs)
* Save measurement data and setting values in an SD card
* Easy parameter setting allowed by direct touch on touch panel
* Plus common and minus common shared, and Sink type / Source type selectable
* 4000 times/sec high-speed digital processing
 

F395

Dynamic Force Processor of Real-time Waveform Processing Type

 
* Waveform comparison function with XY function
* Visibility and operability improved by application of the color LCD and touch panel
* Communication function with control of sampled waveform uploaded to PC by spreadsheet software
* High-speed digital circuit with processing capability of 4000 times/sec (max)
* 20 types of hold modes including Peak, Valley, Relative Maximum Value, Relative Minimum Value and Inflection Point are switchable by external signal.
 

F372

Digital Indicator of Color Graphic Display / Touch Panel Type

 
* Changes in physical quantity, that are recognizable only by numerical display, are displayed in waveform.
* Extensive Hold functions that enable holding an accurate point and OK/NG judgment function
* Double Hold that can perform two types of Hold simultaneously, Before Value Comparison and Relative Value Comparison functions are included.
* Easy and simple setting operation by directly touching touch panel
* Compact square DIN 96 size
* High-speed digital processing capability of 2000 times/sec
 

F377

Digital Indicator of Color Graphic Display / Touch Panel Type for Voltage / Current Output Sensors

 
* Directly connectable to Voltage±10V, Current±20mA
* Changes in physical quantity, that are recognizable only by numerical display, are displayed in waveform.
* Extensive hold functions that enable holding an accurate point and OK/NG judgment function
* Double Hold that can perform two types of Hold simultaneously, Before Value Comparison and Relative Value Comparison functions are included.
* Compact square DIN 96 size
* High-speed digital processing capability of 2000 times/sec
 

F370&F371

Digital Indicator of Color Graphic Display / Touch Panel Type

 
* Powerful waveform hold functions that enable holding an accurate point
* Hold point marked with red dot on waveform for easy confirmation
* Monitoring of input waveform enabled on graphic screen
* Compact square DIN 96 size
* High-speed digital processing capability of 2000 times/sec
* Color liquid crystal display attaining both visibility and operability
* CE marking approved

(Functions equipped only with F371)
Analog monitor output, standard built-in RS-232C

*F370 and F371 are scheduled to shift to F372.
The production end date has not yet been determined. For details, contact our staff in charge of measurement and weighing instrument sales.
 

F350

Digital Indicator of 2ch Input Type

 
* Calculation and judgment outputs are available for 2ch input values of strain gauge type sensors.
* Calculation functions (ch1+ch2, ch1-ch2, |ch1-ch2|, High select, Low select)
* 9 points of judgment outputs are equipped.
* Sampling speed as high as 3000 times/sec on each channel
* Equivalent input calibration function enables calibration only by key-inputting the Rated Value of a sensor.
* Analog monitor output
 

F320

Compact DIN 96 x 48 mm Size Digital Indicator

 
* Convenient DIN 96 x 48 mm size that can be easily mounted on control panel
* Standard built-in RS485 (Modbus-RTU communication protocol)
* High-speed digital processing capability of 2000 times/sec
* Equivalent input calibration function allows calibration only by key-inputting the Rated Value of a sensor.
 

F340A

Compact Square DIN 96 Type Digital Indicator

 
* Analog peak hold function providing high-speed peak hold
* Digital zero function for one-touch zeroing of indicated value
* Compact square DIN 96 size
* High-speed HI/LO limit comparison function
* Equivalent input calibration function enables calibration only by key-inputting the Rated Value of a sensor.
 

F130

Loadcell Interface for OMRON SYSMAC CJ1/CJ2

 
* Direct connection to OMROM SYSMAC CJ1/CJ2 network system
* High-speed sampling of 3000 times/sec
* Completely seamless communication between CJ1/CJ2 and F130
* System development time is reduced and maintenance management modifications and servicing are easy
* With greatly simplified inter-equipment wiring, cost advantages can be expected.
 

F490A

Portable Digital Indicator with Recording Function

 

* Lightweight design of 290g for portable use
* Measurement data is recorded in CSV format in its internal memory.
* Recorded data can be referred to and copied via USB interface.
* Various display modes such as graphic display and recorded data display prepared
* Multi-calibration function that allows four calibration values to be stored and read
* 4 types of Hold functions can set the data observation range.

 
 
Unipulse Vietnam | ANS Vietnam