682477EBC97142748B0F3F7638AC43C2.png

6308PT

6308PT

Description

1/4 DIN panel mount pH single parameter analyzer with electrode efficiency display function. Features pH linear or antilog transmitter output, hysteresis control and uninterrupted operation during pH calibration. Has one 4-20mA output, 5 relays and a RS-485 communications interface. Graphical display. 115/230V AC. CE Approved.
  • Bright, graphical LCD display, 1.5 x 2.25
  • Simultaneous measurement and analysis
  • 1/4 DIN watertight, ip65 rated enclosure
  • Reversible & isolated 4 to 20ma output with adjustable bandwidth
  • Continuous controller / relays operation during calibration
  • 4-digit password security protection
  • Programmable set point hysteresis
  • Automatic temperature compensation
  • CE approved
  • Built in ISO9001 certified facility
  • Membrane keypad with audio feedback
  • Power down, non-volatile memory backup
  • RS-485 output
  • Multiple spst on/off relays
  • Embedded self diagnostic program
  • High 50/60 hz noise rejection

Specifications

  •   Range Resolution Accuracy
    pH -2.00 to 16.00 0.01 pH 0.1% ± 1 lSD
    Temp. -10.0 to 120 °C 0.1 °C ±0.3 °C
  • pH

    • Temperature compensation range: -10.0 to 120.0 °C
    • Buffer recognition: 4.01,7, 10.01 / 4.00,6.86, 9.18
    • Buffer temperature range: 0 to 60.0 °C
    • Electrode slope compensation: ±30% of ideal slope
    • Electrode offset compensation: ±100 mV
    • Input impedance: Greater than 10 exp(13) ohms
    • Calibration auto end point sensing: Yes

    Output Relays

    • pH: 2programmable high or 2 low
    • Temperature: 1programmable high or 1 low
    • Control type: On/off
    • Relay output (resistive load only): 5amps at 115 VAC 2.5 amps at 230 VAC
    • Relay set point hysteresis: User programmable

    Current Output

    • Type: Isolated 4 to 20 mA
    • Range: Selectable zero, & span
    • Accuracy: ±0.02mA
    • Isolated voltage: 500 VDC
    • Maximum load: 500 w

    General

    • ATC sensor: Thermistor 10kilo ohms at 25 c
    • Security protection: 4digit password
    • Keypad: Audio feedbackup
    • Communication: RS-485
    • Pre-amplifier voltage: ±5 VDC,20mA max output
    • Power source: 115/230 VAC, 50/60hz
    • Dimensions: 1/4 DIN, depth 148mm
    • Weight: 950 gm

 

pH sensor
Model: IP-600-10
 

Jenco Vietnam | ANS Vietnam